|
29.06.2021 13:01:10
|
|
JEREL Pharmaceutical Blister Aluminum Foil for pill tablet capsule pack24
|
Product Name:JEREL Pharmaceutical Blister Aluminum Foil for pill tablet capsule pack
Product Description:
Adopting hard anodized aluminum as cover material, PTP foil is easy to break aluminum foil to take out the drugs by pushing the cover. Adopting heat-seal coating material, which cannot be stripped, PTP blister foil can be bonded with all kinds of plastic-based materials.
Product Name Blister aluminum foil/Pharmacitical aluminum foil/PTP aluminum foil
Alloy 8011 H state
Width ≤600mm
Thickness 20mic, 25mic, 30mic
Construction (Unprinted) OP/ALU/VC; (Printed) OP/INK/ALU/INK/VC
ID 76mm/152mm(3 inches/6 inches)
ED 240mm
Length 1500m(20mic)
Weight 60g/㎡(20mic); 20kg/roll(250*0.02mm)
Density 2.7g/?
Packing PE film/Foam gasket/plastic plug/carton/pallet
Container load 20-25 tons in 20 GP container
Price:5.00
Product Website:http://www.jikychina.com
Company Description
YANGZHOU JEREL NEW MATERIAL COMPANY
Address:JIANGSUJIANGSUYANGZHOUGUANGLINGRoom 1001, Building A, Innovation Center, Guanglin Area, Yangzhou City, Jiangsu Province
Descption:JEREL New Material Co,; Ltd was established in 2007, specializes in pharmacy, food and high level commodity packing material development and manufacture.
Senior executives settled a solid foundation for JEREL with their 20-year experience in pharmaceutical packing industry. As for the past years, JEREL spread its cooperation network around the globe.
Our main products lines include pharmaceutical aluminum foil series goods, pvc series products and composited plastic film series products. In details, there are pharmaceutical PTP aluminum foils, cold forming aluminum foils, pharmaceutical PVC hard films, PVC/PE and PVC/PVDC compound hard films, paper/plastic compound, paper/aluminum/plastic compound films, and more than 10 kinds of goods in three series.
JEREL's factory meets 100K Class clarification plant which is approved by GMP. We have advanced semi-auto production equipment and a full set of inspection instruments. At the same time, our company has established perfect quality control system, together with professional technicians and mature product technology. Both the hardware and software conditions guarantee that perfect case solutions can be provided. 27 semi-auto production lines were built to perform 24 hours manufacturing speed with an annual capacity of over 3000 Metro Tons aluminum foil, together with 25000 tons PVC PVDC products per year.
Registered Capital:100
EmployeeNum:100
YANGZHOU JEREL NEW MATERIAL COMPANY
Contact:Skylar Min
Telphone:86-514-86449698-0
Fax:86-514-86449698-0
Email:jerelpack@aliyun.com
Company Website:https://www.jikychina.com
|
|
29.06.2021 13:01:11
|
|
JEREL Cold Forming Alu Alu Blister Foil Pharmaceutical Grade40
|
Product Name:JEREL Cold Forming Alu Alu Blister Foil Pharmaceutical Grade
Product Description:
Cold forming alu alu foil is one of the most high-barrier material among primary packing materials.It is a composited material made of OPA ALU PVC. Mostly applied in high-end tablets and capsules packaging. Alu alu foil from Yangzhou Jerel is one of the top selling products since 2007.
Performance
- High barrier, easy to shape, no cracking, no delamination
- 160mic thickness is suitable for double zero size and below blister
- 150mic thickness is suitable for single zero size and below blister
- Water vapor transmission rate, national standard 0.5g/㎡24h
- Gas transmission rate: national standard 0.5?/㎡24h0.1? V.S. our company data 0.02?/㎡24h0.1?
Cold forming aluminum foil, or we can short as alu alu foil, is with good material features. The smooth surface and shinny color will enrich the packing of medicine inside. Also with good protection from oxygen and steam.
Price:5.00
Product Website:http://www.jikychina.com
Company Description
YANGZHOU JEREL NEW MATERIAL COMPANY
Address:JIANGSUJIANGSUYANGZHOUGUANGLINGRoom 1001, Building A, Innovation Center, Guanglin Area, Yangzhou City, Jiangsu Province
Descption:JEREL New Material Co,; Ltd was established in 2007, specializes in pharmacy, food and high level commodity packing material development and manufacture.
Senior executives settled a solid foundation for JEREL with their 20-year experience in pharmaceutical packing industry. As for the past years, JEREL spread its cooperation network around the globe.
Our main products lines include pharmaceutical aluminum foil series goods, pvc series products and composited plastic film series products. In details, there are pharmaceutical PTP aluminum foils, cold forming aluminum foils, pharmaceutical PVC hard films, PVC/PE and PVC/PVDC compound hard films, paper/plastic compound, paper/aluminum/plastic compound films, and more than 10 kinds of goods in three series.
JEREL's factory meets 100K Class clarification plant which is approved by GMP. We have advanced semi-auto production equipment and a full set of inspection instruments. At the same time, our company has established perfect quality control system, together with professional technicians and mature product technology. Both the hardware and software conditions guarantee that perfect case solutions can be provided. 27 semi-auto production lines were built to perform 24 hours manufacturing speed with an annual capacity of over 3000 Metro Tons aluminum foil, together with 25000 tons PVC PVDC products per year.
Registered Capital:100
EmployeeNum:100
YANGZHOU JEREL NEW MATERIAL COMPANY
Contact:Skylar Min
Telphone:86-514-86449698-0
Fax:86-514-86449698-0
Email:jerelpack@aliyun.com
Company Website:https://www.jikychina.com
|
|
29.06.2021 13:01:11
|
|
JEREL Medical Grade OPA ALU PVC Triplex Foil64
|
Product Name:JEREL Medical Grade OPA ALU PVC Triplex Foil
Product Description:
Alu Alu foil can accept printing, maximum 2 color printing. Mostly company logo and company name as the blister bubble will twist the word shapes so it is not suitable for multiple color printing.
For the base color of alu alu foil, there are silver and gold. The bubble size is applicable for capsule size from 00# to 0#.
- High barrier, easy to shape, no cracking, no delamination
- 160mic thickness is suitable for double zero size and below blister
- 150mic thickness is suitable for single zero size and below blister
- Water vapor transmission rate, national standard 0.5g/㎡24h
- Gas transmission rate: national standard 0.5?/㎡24h0.1? V.S. our company data 0.02?/㎡24h0.1?
Cold forming aluminum foil, or we can short as alu alu foil, is with good material features. The smooth surface and shinny color will enrich the packing of medicine inside. Also with good protection from oxygen and steam.
Price:5.00
Product Website:http://www.jikychina.com
Company Description
YANGZHOU JEREL NEW MATERIAL COMPANY
Address:JIANGSUJIANGSUYANGZHOUGUANGLINGRoom 1001, Building A, Innovation Center, Guanglin Area, Yangzhou City, Jiangsu Province
Descption:JEREL New Material Co,; Ltd was established in 2007, specializes in pharmacy, food and high level commodity packing material development and manufacture.
Senior executives settled a solid foundation for JEREL with their 20-year experience in pharmaceutical packing industry. As for the past years, JEREL spread its cooperation network around the globe.
Our main products lines include pharmaceutical aluminum foil series goods, pvc series products and composited plastic film series products. In details, there are pharmaceutical PTP aluminum foils, cold forming aluminum foils, pharmaceutical PVC hard films, PVC/PE and PVC/PVDC compound hard films, paper/plastic compound, paper/aluminum/plastic compound films, and more than 10 kinds of goods in three series.
JEREL's factory meets 100K Class clarification plant which is approved by GMP. We have advanced semi-auto production equipment and a full set of inspection instruments. At the same time, our company has established perfect quality control system, together with professional technicians and mature product technology. Both the hardware and software conditions guarantee that perfect case solutions can be provided. 27 semi-auto production lines were built to perform 24 hours manufacturing speed with an annual capacity of over 3000 Metro Tons aluminum foil, together with 25000 tons PVC PVDC products per year.
Registered Capital:100
EmployeeNum:100
YANGZHOU JEREL NEW MATERIAL COMPANY
Contact:Skylar Min
Telphone:86-514-86449698-0
Fax:86-514-86449698-0
Email:jerelpack@aliyun.com
Company Website:https://www.jikychina.com
|
|
29.06.2021 13:01:11
|
|
JEREL Pharmaceutical PTP Aluminum Foil25
|
Product Name:JEREL Pharmaceutical PTP Aluminum Foil
Product Description:
1 Primer (OP) is suitable for uvink, solvent ink, water based ink
2 Heat sealing lacquer (vc) is suitable for ALU ALU FOIL/PVC /PP/PS/PET
3 HSL 3-5g is suitable for Asian standards, 6-8g is suitable for European standards
4 Printing colors: 1-3 colors, double-sided printing, full bottom with single color printing
5 Water vapor transmission rate, national standard 0.5g/㎡24h
6 Heat sealing strength 7.0N(PVC),6N(PVDC)
Blister Aluminum Foil is a kind of coated aluminum foil, used for cover lidding foil in pharma industry. It provides excellent properties such as of anti-oxygen, moisture-proof, leak-proof, carry-home, anti-pollution, etc.
Adopting hard anodized aluminum as cover material, blister foil is easy to break aluminum foil to take out the drugs by pushing the cover. Adopting heat-seal coating material, which cannot be stripped, PTP blister foil can be bonded with all kinds of plastic-based materials.
Price:5.00
Product Website:http://www.jikychina.com
Company Description
YANGZHOU JEREL NEW MATERIAL COMPANY
Address:JIANGSUJIANGSUYANGZHOUGUANGLINGRoom 1001, Building A, Innovation Center, Guanglin Area, Yangzhou City, Jiangsu Province
Descption:JEREL New Material Co,; Ltd was established in 2007, specializes in pharmacy, food and high level commodity packing material development and manufacture.
Senior executives settled a solid foundation for JEREL with their 20-year experience in pharmaceutical packing industry. As for the past years, JEREL spread its cooperation network around the globe.
Our main products lines include pharmaceutical aluminum foil series goods, pvc series products and composited plastic film series products. In details, there are pharmaceutical PTP aluminum foils, cold forming aluminum foils, pharmaceutical PVC hard films, PVC/PE and PVC/PVDC compound hard films, paper/plastic compound, paper/aluminum/plastic compound films, and more than 10 kinds of goods in three series.
JEREL's factory meets 100K Class clarification plant which is approved by GMP. We have advanced semi-auto production equipment and a full set of inspection instruments. At the same time, our company has established perfect quality control system, together with professional technicians and mature product technology. Both the hardware and software conditions guarantee that perfect case solutions can be provided. 27 semi-auto production lines were built to perform 24 hours manufacturing speed with an annual capacity of over 3000 Metro Tons aluminum foil, together with 25000 tons PVC PVDC products per year.
Registered Capital:100
EmployeeNum:100
YANGZHOU JEREL NEW MATERIAL COMPANY
Contact:Skylar Min
Telphone:86-514-86449698-0
Fax:86-514-86449698-0
Email:jerelpack@aliyun.com
Company Website:https://www.jikychina.com
|
|
29.06.2021 13:01:11
|
|
JEREL ALU/PE Pharmaceutical Strip Aluminum Foil86
|
Product Name:JEREL ALU/PE Pharmaceutical Strip Aluminum Foil
Product Description:
Strip aluminum foil, also called alu/pe composited foil, can resist vapor, oxygen and UV rays with good performance of aroma barrier.Widely applied in suppository packaging.
ALU/PE: ALU sealing barrier, PE for heat sealing
Product Performance High barrier, easy to heat seal
Water Vapor Transmission Rate: the test data is less than 0.5g/㎡24h
Gas Transmission Rate: the test data is less than 0.05cm3/㎡24H 0.1MPa
Strip foil can absolutely resist vapor, oxygen and UV rays with good performance of aroma barrier.
Each blister is a single protection unit, no effect to barrier after opening first cavity. Strip foil is suitable to pack drugs that easy to be affected in wet regions and tropics. Mostly applicable for suppository, tablets and capsules size from 3-4#.
Price:5.00
Product Website:http://www.jikychina.com
Company Description
YANGZHOU JEREL NEW MATERIAL COMPANY
Address:JIANGSUJIANGSUYANGZHOUGUANGLINGRoom 1001, Building A, Innovation Center, Guanglin Area, Yangzhou City, Jiangsu Province
Descption:JEREL New Material Co,; Ltd was established in 2007, specializes in pharmacy, food and high level commodity packing material development and manufacture.
Senior executives settled a solid foundation for JEREL with their 20-year experience in pharmaceutical packing industry. As for the past years, JEREL spread its cooperation network around the globe.
Our main products lines include pharmaceutical aluminum foil series goods, pvc series products and composited plastic film series products. In details, there are pharmaceutical PTP aluminum foils, cold forming aluminum foils, pharmaceutical PVC hard films, PVC/PE and PVC/PVDC compound hard films, paper/plastic compound, paper/aluminum/plastic compound films, and more than 10 kinds of goods in three series.
JEREL's factory meets 100K Class clarification plant which is approved by GMP. We have advanced semi-auto production equipment and a full set of inspection instruments. At the same time, our company has established perfect quality control system, together with professional technicians and mature product technology. Both the hardware and software conditions guarantee that perfect case solutions can be provided. 27 semi-auto production lines were built to perform 24 hours manufacturing speed with an annual capacity of over 3000 Metro Tons aluminum foil, together with 25000 tons PVC PVDC products per year.
Registered Capital:100
EmployeeNum:100
YANGZHOU JEREL NEW MATERIAL COMPANY
Contact:Skylar Min
Telphone:86-514-86449698-0
Fax:86-514-86449698-0
Email:jerelpack@aliyun.com
Company Website:https://www.jikychina.com
|
|
29.06.2021 13:01:12
|
|
JEREL OPA/ALU/VC Pharmaceutical Tropical Aluminum Foil18
|
Product Name:JEREL OPA/ALU/VC Pharmaceutical Tropical Aluminum Foil
Product Description:
Tropical aluminum foil is mainly for high-end medicine packing. Comparing with traditional SP composited bag, tropical foil can be directly heat-sealing with PVC to provide a double-barrier protection from light, gas, steam and oxygen.
OPA/ALU/VC OPA protects the brewing from breaking, ALU sealing barrier, VC and PVC heat sealing
Product Performance High barrier, easy to shape, easy to heat seal
Water vapor transmission rate, the test data is less than 0.5g/㎡24h
Gas transmission rate, test data 0.05cm3/㎡24H 0.1MPa
Tropical aluminum foil is mainly for high-end medicine packing. Comparing with traditional SP composited bag, tropical foil can be directly heat-sealing with PVC to provide a double-barrier protection from light, gas, steam and oxygen.
Tropical foil can be printed while usually embossing pattern are more common. Tropical foil uses 8021 Soft temper aluminum which is easy to be shaped. Its upper layer, PA, can prevent the bubble shaping from being broken.
Price:5.00
Product Website:http://www.jikychina.com
Company Description
YANGZHOU JEREL NEW MATERIAL COMPANY
Address:JIANGSUJIANGSUYANGZHOUGUANGLINGRoom 1001, Building A, Innovation Center, Guanglin Area, Yangzhou City, Jiangsu Province
Descption:JEREL New Material Co,; Ltd was established in 2007, specializes in pharmacy, food and high level commodity packing material development and manufacture.
Senior executives settled a solid foundation for JEREL with their 20-year experience in pharmaceutical packing industry. As for the past years, JEREL spread its cooperation network around the globe.
Our main products lines include pharmaceutical aluminum foil series goods, pvc series products and composited plastic film series products. In details, there are pharmaceutical PTP aluminum foils, cold forming aluminum foils, pharmaceutical PVC hard films, PVC/PE and PVC/PVDC compound hard films, paper/plastic compound, paper/aluminum/plastic compound films, and more than 10 kinds of goods in three series.
JEREL's factory meets 100K Class clarification plant which is approved by GMP. We have advanced semi-auto production equipment and a full set of inspection instruments. At the same time, our company has established perfect quality control system, together with professional technicians and mature product technology. Both the hardware and software conditions guarantee that perfect case solutions can be provided. 27 semi-auto production lines were built to perform 24 hours manufacturing speed with an annual capacity of over 3000 Metro Tons aluminum foil, together with 25000 tons PVC PVDC products per year.
Registered Capital:100
EmployeeNum:100
YANGZHOU JEREL NEW MATERIAL COMPANY
Contact:Skylar Min
Telphone:86-514-86449698-0
Fax:86-514-86449698-0
Email:jerelpack@aliyun.com
Company Website:https://www.jikychina.com
|
|
29.06.2021 13:01:12
|
|
JEREL Pharmaceutical PVC Rigid Blister Film48
|
Product Name:JEREL Pharmaceutical PVC Rigid Blister Film
Product Description:
PVC is a plasticizer free, calendared rigid film. It is available in a wide range of colors and thickness. PVC offers a potent chemical resistance and optimized protection. It works best on standard blister packing machines.As a manufacturer, we provide blister pvc film specification customization for our customers.
Advantages: low price (compared to cold aluminum), good molding effect, high visibility
Water vapor transmission rate: the test data is less than 1.4g/m224h
Gas transmission rate: the test data is less than 10cm3/m224H 0.1MPa
Price:2.00
Product Website:http://www.jikychina.com
Company Description
YANGZHOU JEREL NEW MATERIAL COMPANY
Address:JIANGSUJIANGSUYANGZHOUGUANGLINGRoom 1001, Building A, Innovation Center, Guanglin Area, Yangzhou City, Jiangsu Province
Descption:JEREL New Material Co,; Ltd was established in 2007, specializes in pharmacy, food and high level commodity packing material development and manufacture.
Senior executives settled a solid foundation for JEREL with their 20-year experience in pharmaceutical packing industry. As for the past years, JEREL spread its cooperation network around the globe.
Our main products lines include pharmaceutical aluminum foil series goods, pvc series products and composited plastic film series products. In details, there are pharmaceutical PTP aluminum foils, cold forming aluminum foils, pharmaceutical PVC hard films, PVC/PE and PVC/PVDC compound hard films, paper/plastic compound, paper/aluminum/plastic compound films, and more than 10 kinds of goods in three series.
JEREL's factory meets 100K Class clarification plant which is approved by GMP. We have advanced semi-auto production equipment and a full set of inspection instruments. At the same time, our company has established perfect quality control system, together with professional technicians and mature product technology. Both the hardware and software conditions guarantee that perfect case solutions can be provided. 27 semi-auto production lines were built to perform 24 hours manufacturing speed with an annual capacity of over 3000 Metro Tons aluminum foil, together with 25000 tons PVC PVDC products per year.
Registered Capital:100
EmployeeNum:100
YANGZHOU JEREL NEW MATERIAL COMPANY
Contact:Skylar Min
Telphone:86-514-86449698-0
Fax:86-514-86449698-0
Email:jerelpack@aliyun.com
Company Website:https://www.jikychina.com
|
|
29.06.2021 13:01:12
|
|
JEREL Pharmaceutical PVC PVDC Coated Blister Rigid Film45
|
Product Name:JEREL Pharmaceutical PVC PVDC Coated Blister Rigid Film
Product Description:
Pharmaceutical blister PVC & PVDC film is with good shaping and barrier effect to protect the medicine inside for storage. The opaque and transparent color options enrishes the choices of customers for different needs of pvc and pvdc rigid film. As a manufacturer, we can customize the size and thickness for clients.
Advantages: good sealing, high barrier, good molding effect, see-through
Water vapor transmission rate:
PVDC25GSM is less than 0.75g/m2.24H,
PVDC40GSM is less than 0.6g/m2.24H,
PVDC60GSM is less than 0.4g/m2.24H,
PVDC90GSM is less than 0.3g/m2.24H
Gas permeability:
PVDC25GSM is less than 0.6g/m2.24H,
PVDC40GSM is less than 0.4g/m2.24H,
PVDC60GSM is less than 0.3g/m2.24H,
PVDC90GSM is less than 0.2/m2.24H
Price:4.00
Product Website:http://www.jikychina.com
Company Description
YANGZHOU JEREL NEW MATERIAL COMPANY
Address:JIANGSUJIANGSUYANGZHOUGUANGLINGRoom 1001, Building A, Innovation Center, Guanglin Area, Yangzhou City, Jiangsu Province
Descption:JEREL New Material Co,; Ltd was established in 2007, specializes in pharmacy, food and high level commodity packing material development and manufacture.
Senior executives settled a solid foundation for JEREL with their 20-year experience in pharmaceutical packing industry. As for the past years, JEREL spread its cooperation network around the globe.
Our main products lines include pharmaceutical aluminum foil series goods, pvc series products and composited plastic film series products. In details, there are pharmaceutical PTP aluminum foils, cold forming aluminum foils, pharmaceutical PVC hard films, PVC/PE and PVC/PVDC compound hard films, paper/plastic compound, paper/aluminum/plastic compound films, and more than 10 kinds of goods in three series.
JEREL's factory meets 100K Class clarification plant which is approved by GMP. We have advanced semi-auto production equipment and a full set of inspection instruments. At the same time, our company has established perfect quality control system, together with professional technicians and mature product technology. Both the hardware and software conditions guarantee that perfect case solutions can be provided. 27 semi-auto production lines were built to perform 24 hours manufacturing speed with an annual capacity of over 3000 Metro Tons aluminum foil, together with 25000 tons PVC PVDC products per year.
Registered Capital:100
EmployeeNum:100
YANGZHOU JEREL NEW MATERIAL COMPANY
Contact:Skylar Min
Telphone:86-514-86449698-0
Fax:86-514-86449698-0
Email:jerelpack@aliyun.com
Company Website:https://www.jikychina.com
|
|
1
|