|
text2arc generator
Description:
This is a cadl / kxl to create text around a Arc/Circle. It has a cadl for KC3 and a KXL for KC4. There is also a file called Text2arc.exe which I wrote in VB6 as a dialog interface. (try to double click on the text2arc.exe file if a dialog box appears in the center of the screen then all is fine, otherwise you have to run the setup.exe file also included in the zip file). Copy the file text2arc.exe and text2arc KC3.cdl to the KC3 CADL directory and run the cadl.
INSTALL IN CADL FOLDER FOR VERSION 3 AND INSTALL IN KXL FOLDER FOR VERSION 4
|
|
Part_Size_Note.cdl
Description:
This is a handy little cdl that adds a note to the drawing that asks the user for the part name the matrial that it is made from and then promts the user to select the dimensions of the part and then asks what type of cut should it be "Saw cut, Stock, Milled, Or Ground".
|
|
SETLEVELANDOLOR.cld
Description:
This little CDL Sets the current Part settings to a selected entity's ( SET COLOR, LEVEL, LINESTYLE and WIDTH)
|
|
Create_Sublevel With Name.cdl
Description:
This cdl Creates a sublevel to an existing level. Selecting the level by picking an entity belong to this level.
|
|
Get_Tolerance.cdl
Description:
This CDL Sets the tolerance parameters by selecting an existing dimension. The instance where the existing dimension belongs has to be active
|
|
Stock_Width.cdl
Description:
If there are some of you out there that does progressive form dies and need a easy way to get the stock width for you parts then just try this little CDL. This will Prompt the user to select the material thickness line and then the inside lines and arcs for the left and right sides of the part. When complete it will display the stock width to produce the part.
|
|
Auto_Tonnage.cdl
Description:
If you liked the Manual Tonnage CDL then you'll want this one to, It prompts the user for the line that is the material thickness and then the holes or profiles that will be "punched". This CDL has the ability to include the shear on the punches as well as punch stagger.
|
|
Manual_Tonnage.cdl
Description:
If you liked the stripping CDL then you'll want this one, It Calculates the tonnage for a punched hole or Shape. The Round hole is calculated differently then the shaped hole. This is a manual input CDL to find the tonnage.
|
|
Stripping.cdl
Description:
This little CDL is just simple. The user inputs variables for the tonnage required to punch a hole or shape and then the CDL will do the math for you and give you the required spring pressure for stripping the part.
|
|
Keyway.cdl
Description:
This CDL Draws a internal bore with a user input sized keyway. It is a simple
CDL to show you how to Program geometry with CADL language.
|
|